I. TVR 30W Cylinder MOD Battery:
TVR 30W Cylinder MOD is powerful,simple and smart,output wattage up to 30W. Completely compatible with eGo|510 thread atomizers, well fit MEGA clearomizer and Sub-Ohms tank,for example: Nautilus clearomizer,Aerotank MEGA clearomizer,Altantis, eTank, F-30,MELO III mini,Pisces A5,Kamry K1000 sub-ohm tank,etc...
-1. On/Off: click the power button 5 times to turn on the TVR 30W Cylinder MOD Battery and 5 times again to turn off the TVR 30W Battery.
-2. Work: Screw and connect the atomizer/tank with the TVR 30W MOD Battery, then they will be stand-by state, it works only when you press the TVR 30W Battey power button. Press the power button and inhale at the same time.
-3. Low V: If the battery voltage is less than 3.2V, the LED light will turn to red color
-4.Battery Charging: By android cable recharge at the lateral, it will take 2-3 hours to charge the battery with 1A wall adaptor.
II. Nautilus BVC Adjustable Airflow Pyrex Glass Tank Clearomizer:
Please click for: How to assembly Nautilus clearomizer? How to refill e-liquid to Nautilus tank? How to adjust the Nautilus airflow?
Nautilus BVC Adjustable Airflow Pyrex Glass Tank Clearomizer is the next generation of tank systems. Made of stainless steel and Pyrex glass, the Nautilus also uses the “BVC” (Bottom Vertical Coil) atomizer technology. The Nautilus has an exclusive adjustable airflow design that is revolutionarily. With a simple turn of the lower ring, you have four options to adjust airflow to meet people’s different requirements for vaping. With the option of different size air-ports, it allows the user to produce big clouds of vapor, with a pure and clean taste. With the unique Nautilus four-port system, you can now adjust how hard or soft the draw is, how warm or cold the vapor is, and how much vapor is produced. The Nautilus is also very easy to install and refill.
1)Adjustible airflow control with four options: You can control the airflow to the amount you prefer, to adjust how hard or soft the draw is, how warm or cold the vapor is, and how much vapor is produced.
2)It uses a special dual coil and can produce much more vapor
3) Threaded Pyrex glass tube is replaceable,the Pyrex glass surrounding provides best safety and healthier environment for e-liquid
4) It is a Bottom Vertical Coil Changeable (BVC) "clearomizer" heating from bottom, the heating coils are placed at bottom which is much better for evaporating e-liquid, special dual coil head can produces much more vapor. They can be easily replaced, just screw, no welding or solder.
5) Big Size: Diameter:22mm (completely match with the MOD series), Big E-liquid capacity: 5ml
6) Simple to fill, easy to clean, smooth airflow.
7) No burning smell, no leakage, very large vapor.
8) Compatible with all of eGo series batteries and MOD series.
III. Base Package:
One TVR30W Cylinder MOD e-cig (with Nautilus BVC clearomizer) starter kit including:
1 Metal Tip (Replaceable 510 drip tip)
1 Upper Hardware
1 Pyrex Glass Tank (replaceable)
2 BVC Bottom Vertical Coil Heads (replaceable)
1 Airflow Adjustment Bottom Base
1 eGo Threaded Cone
1 TVR 30W Cylinder MOD Battery
1 Mirco USB charging Cable
1 510-eGo threading connector
IV. Characteristics:
Name : TVR 30W MOD e-cig (with Nautilus BVC clearomizer) starter kit
Body Material: Stainless Steel
Diameter: 22mm
Length: 220mm
Net Weight of one piece e-cig: 116gram
Shipping Weight:315gram
Resistance: Normal resistance: Dual 3.6 ohm coils in parallel giving a total resistance of approximately 1.8 ohms (+/- 0.2); Low reistance: Dual 2.8 ohm coils in parallel giving a total resistance of approximately 1.4 ohms (+/- 0.2)
Airflow size: Ø0.9mm, Ø1.1mm, Ø1.4mm, Ø1.8mm
Content of battery :2200mAh High Drain Built-in rechargeable
E-liquid capacity:about 5ml
Mouthfuls keep: about 1200 mouthfuls=75pcs ordinary cigarettes (16 mouthfuls of ordinary cigarette)
|
