| The eGo CE5 is exchangeable & detachable clear cartomizer(clearomizer) with flat tip, is new generation of eGo CE4 cartomizer made as a new design exchangeable clear cartomizer as anyone can easy to check the cartomizer directly, can rechange and wash the coil/wick inside, and if the CE5 cartomizer needs to be cleaned or mechanical problems occur as the cartomizer have been separate as people can diagnosis by himself. So people can only change the question eGo CE5 cartomizer coil head and keep the CE5 cartomizer clean which likes the new one. CE5 cartomizer is the latest Clearomizer designed to work with eGo Series batteries:
1) Easy to fill the e-liquid. Just take off the CE5 cartomizer inhaler tip, fill the e-liquid, and then screw back the inhaler tip onto the eGo CE5 cartomizer.
2) Huge capacity, eGo ce5 cartomizer can hold about 1.6ml of E-liquid.
3) Fits nicely on an eGo giving a clean finished look.
4) With scale on the eGo CE5 transparent clearomizer, you can see how much nicotine you inhaled.
5) Longer wicks for more consistent flow of e-liquid to the coil in any position
6) The accessories are separable,this makes it easy to replace, more convenient and economical E-cigarette by using eGo CE5 cartomizer changeable coil head and clear tube.
7) No burning, no leaking. Very large vapor.
8) Work with all of eGo Series batteries.
An eGo-CE5 cartomizer set (Flat tip) includes:
*1 eGo CE4/CE5 cartomizer tip (Flat tip)
* 1 eGo CE5/CE6 cartomizer coil head
* 1 eGo CE5 cartomizer clear tube
* 1 eGo CE5/CE6 cartomizer base
Characteristics:
Resistance: 3.0 Ohms(Normal resistance), 2.0 Ohms (Low reistance)
Diameter: 14mm
Length: 75mm (with tip)
Weight: 17g
E-liquid content:about 1.6ml
Mouthfuls keep: about 360 mouthfuls=22pcs ordinary cigarettes (16 mouthfuls of ordinary cigarette)
What e-cigarette batteries can be used in this eGo CE5 cartomizer?
eGo CE5 cartomizer can be compatible with all eGo series batteries (eGo battery, eGo MEGA battery, eGo LCD battery, eGo LCD MEGA battery, eGo USB passthrough battery)
How to change the coil head on eGo CE5 cartomizer(Clearomizer):
Step 1: Unscrew the eGo CE5 cartomizer tube from eGo CE5 cartomizer base.
Step 2: Unscrew the eGo CE5 cartomizer coil head from the top of the base assembly.
Step3: Screw the new eGo CE5 cartomizer coil head into the CE5 cartomizer base again;
Step4: Screw the CE5 cartomizer tube back into the eGo CE5 cartomizer base.
How to fill e-liquid to the eGo CE5 cartomizer(clearomizer):
Step 1: Take out the e-liquid bottle lid;
Step 2: Cut off the top of bottle;
Step 3: Unscrew the CE5 cartomizer tip from the CE5 cartomizer tube.
Step 4: Fill the e-liquid to the CE5 cartomizer.
Using an eliquid bottle or syringe, fill the CE5 cartomizer by inserting e-liquid down the side wall (Do not fill e-liquid in the center hole, that is for air flow).
Step 5: Screw the eGo CE5 cartomizer tip back into the CE5 cartomizer tube(do not screw too tightly).
|
