Notice: --0.5 to 1.2 Ohms: A 10amp continuous discharge battery is required; 0.2 to 0.5 Ohms: A 25amp or higher continuousdischarge battery is required. --BTC 0.2 ohm work with 20W to 50W; BTC 0.5 ohm work with 20W to 40W; BTC 1.0 ohm work with 10W to 30W; --BTDC 0.2 ohm wok with 30W to 100W; BTDC 0.5 ohm work with 30W to 80W.
Instruction of XL16 Sub-Ohm tank atomizer:
The X16 Sub-Ohm Tank brings you the best and satisfying vape experience. The sub ohm tank/clearomizers feature replaceable coils heads that can be vaped at less than 1 ohm, the various types of replacement coils are available to best suit your needs. These sub-ohm coils are built with 100% USA made resistance wires and organic cotton for enhanced vapor production and a cleaner, more flavorful vape. The atomizers with large wicking to support high wattage vaping, The X16 sub-ohm tank features a range of different BTDCs (bottom turbine dual coils) and BTCs (bottom turbine coils) and fires between 10W and 100W.It has a generous 4.0ml e-liquid capacity.

Advantage of X16 Sub-Ohm tank atomizer:
-Size: Ø22mm, E-liquid capacity: 4.0ml. -BDVC(Bottom Vertical Dual Coil) technology. -100% USA made resistance wire, 100% organic cotton, more healthy and performs better. -Heat-insulated Cone Mouthpiece -BTDC0.5Ω,BTC1.0Ω, can handle up to 100W. -Bottom base 510 thread electrode, fit with almost battery MODs.

Standard Configuration of X16 Sub-Ohm tank atomizer:
A X16 Sub-Ohm tank clearomizer includes:
1 Heat-insulated Cone Mouthpiece 1 X16 Sub-Ohm Tank Body 2 X16 Coil Heads
Tips/Suggestion of the X 16 Sub-Ohm tank Atomizer:
1. In order to have a wonderful vaping, we strongly suggest that let the e liquid absorbed fully.( soak around 30 seconds to 40 seconds) 2. 0.5 to 1.2 Ohms: A 10amp continuous discharge battery is required; 0.2 to 0.5 Ohms: A 25amp or higher continuousdischarge battery is required
How to use X16 Sub-Ohm Tank Atomizer:
a. How to assembly/change the X16 tank coil head:
Step 1: screw the Tank Body off the Bottom Base.
Step2: Screw the old coil head out from the bottom base (if necessary).
Step3: Screw the new coil head into the Bottom Base again.
* Tips: A loose coil head can cause leaking.

b. How to fill e-liquid to X16 Tank:
Step 1: Unscrew the Bottom Airflow Adjustable Base from the Tank Body.
Step 2: Fill E-liquid through the slot, and pay attention not to drip it into the central airflow tube.
Step3: Screw the Bottom Airflow Adustable Base into the Tank Boday again.
Then let it stand for several minutes to get the organic cotton completely saturated.

C. How to adjust the X16 tank airflow
Rotate the Bottom Adjustable Airflow Ring to control air input.The airflow system on the X16 tank system has 2 intake holes, which provides plenty of air to the coils. The airflow system is easy to change and slides smoothly into place. However when fully open, which is what we prefer, the airflow makes a lot of noise and whistles quite a bit.

|