* How to use e-cigarette ego-t tank system and fill e-liquid to the e-cigarette eGo-t tank blank(empty) cartridge

The eGo-T tank system e-cigarette builds on the achievements of the e-cigarette eGo. The new power saving battery function improves the efficiency of power consumption. The e-cigarette eGo-T is the first e-cigarette to apply the new tank system for dripping e-liquid directly into its 1.2ml tank cartridge without the use of tissue inside the tank. This revolutionary new e-cigarette makes dripping easier and less frustrating for consumers.

I.Base Package:

The e-cigarette eGo-T(tank) starter kit including:

*  1 eGo-T rubber mouthpiece cover

*  1 eGo-T atomizer

*  2 eGo batteries (eGo, eGo-T and eGo type A use the same battery)

*  1 AC-USB adapter

*  1 eGo USB charger

*  1 bottle 10ml e-liquid

*  5 pcs Blank eGo-T Cartridges

II. How to use

a. Screw the e-cigarette eGo-T battery:

Screw and connect the e-cigarette eGo-T battery with the e-cigarette eGo-T tank atomizer, then will be stand-by state.

b. : Uncover the e-cigarette eGo-T blank Cartridge:

Step 1: Cut the plastic package;

Step 2: Remove the e-cigarette eGo-T cartridge rubber cover;

Step 3: Take off the eGo-T cartridge plastic cover.

c. Fill the e-liuid to the e-cigarette eGo-T tank cartridge:

Step 1: Take out the e-liquid bottle lid;

Step 2: cut off the top of bottle of e-liquid;

Step 3: Drip the e-liquid to the e-cigarette eGo-T tank cartridge until full;

Step 4: Cover the cartridge plastic cover again.

d. Put the e-cigarette eGo-T tank cartridge into the e-cigarette eGo-T atomizer:

Step1: Screw down the old inhaler;

Step2: Put the filled e-cigarette eGo-T tank cartridge into the e-cigarette eGo-T.

       * The e-cigarette eGo-T works only when you press the LED button. Press the LED button and inhale at the same time.

e. Charge the e-cigarette eGo-T battery:

       You just screw the e-cigarette eGo battery with the USB charger, then plug it into the PC or AC-USB Adapter. 1. the first charge should be kept for 8 hours, even if the LED light turns green. 2. Use for 20 minutes., 3. Charge the battery for another 1 hour. Your e-cigarette eGo battery is ready for normal using now. The normal charging time should be kept for 3 hours( even if the LED light turns green).