You can get how to use Atomized e-liquid/e-juice from here: how to fill e-liquid/e-juice to the cartridge, atomizer, cartomizer or clearomizer, ect.
E-liuid (or E-Juice) is the liquid that is used to vaporize. E-liquid typically contains Vegetable Glycerin, Propylene Glycol, Nicotine and Flavoring. The user can generally custom order e-liquid by requesting a certain VG (Vegetable Glycerin) percentage and PG (Propylene Glycol) percentage. The user can also request a certain nicotine strength(density). Nicotine isn’t required to be in e-liquid in order to vaporize it. The common nicotine strengths are from 0mg to 36mg.
How to fill E-liquid(Atomized e-liquid): (no need use the injector)
*step1: take out the bottle lid
*step2: cut off the top of bottle
*step3: drop the 2-3 drops of E-liquid to the atomizer or refill in the cartridge
(tips: do not drop too much e-liquid to the atomizer, otherwise it will leake into the battery and kill your battery)
*step4: then cover the bottle lid
---1. Drop the e-liquid to the e-cigarette atomizer:
You can directly drop 2-3 drops e-liquid to the e-cigarette e-liquid, the atomizer will produce heavy vapor.

---2. Refill e-liquid in the blank/old cartridges:
1). Draw the E-liquid inside the Injector. 2). Inject from the bottom until the E-liquid comes up to top. 3). Put the syringe into the bottom of the blank cartridge, and fill the e-liquid.

---3. Fill/re-fill the e-liquid to the blank/empty/old cartomizer cartridges:
One new blank/empty 103C/510/eGo cartomizer holds about 1ml e-liquid, but we suggest you do not fill more 0.9ml e-cigarette liquid one time, and if your old 510/ego cartomier still can work, you can refill the e-liquid again too, for one old 510/eGo cartomizer, please do not fill more 0.4ml one time.
a. Remove the 103C/510/eGo cartomizer’s rubber cover
A 510/ego cartomizer is one piece cartridge and atomizer contained in a single unit, for filling the e-cigarette e-liquid, you need to remove the 510/eGo cartomizer’s rubber cover first.

b. Take out the 103C/510/eGo cartomizer’s cover
After remove the 510/eGo cartomizer’s rubber cover, you can find there has a plastic white cartomizer cover (not gold parts) on the top of the cartomizer, take out it.

c. Take out the 103C/510/eGo cartomizer’s rubber washer
After take off the cartomizer’s cover, you still need to take out the rubber washer.
d. Fill the e-cigarette liquid to the 103C/510/eGo cartomizer
Now, you can draw the E-liquid inside the syringe, put the syringe into the side(notice: not the center) of the 103C/510/eGo cartomizer.

e. Re-put the parts into the 103C/510/eGo cartomizer
Reput the rubber washer to the filled 103C/510/eGo cartomizer, the plastic cartomizer cover, the new filled 103C/510/eGo cartromizer is finished now.
---4. Fill the e-liuid to the e-cigarette eGo-T/801-T/901-T/510-T/BE112-T tank cartridge.
a. Uncover the e-cigarette blank tank Cartridge:
Step 1: Cut the plastic package;
Step 2: Remove the e-cigarette tank cartridge rubber cover;
Step 3: Take off the tank cartridge plastic cover.

c. Fill the e-liuid to the e-cigarette tank system cartridge:
Step 1: Take out the e-liquid bottle lid;
Step 2: cut off the top of bottle of e-liquid;
Step 3: Drip the e-liquid to the e-cigarette tank cartridge until full;
Step 4: Cover the cartridge plastic cover again.

---5. Fill the e-liuid to the pen style e-cigarette eGo-W F1 (clearotimzer/ transparent/ atomizer/ CE3 Giantomizer).
Step 1: Take out the bottle lid; Step 2: Cut off the top of bottle; Step 3: Put the syringe needle into the bottle or draw the E-liquid inside the Injector.
 Step 4: Fill the e-liquid to the eGo-W F1 clear cartomizer.

---6. Fill the e-liuid to the e-cigarette eGo CE4/CE5/CE6, E-Smart, etc, Clearomizer/Cartomizers.
Step 1: Unscrew the inhaler tip from the CE4/CE5 cartomizer
.
Step 2: .Using an e-liquid bottle or syringe, fill the CE4/CE5 cartomizer by inserting e-liquid down the side wall (Do not fill e-liquid in the center hole, that is for air flow).

---7. Fill the e-liuid to the e-cigarette Mini protank, H2, E-Smart BCC, etc, BCC or BDC Clearomizer/Cartomizer.
Step 1:Unscrew the bottom base from the tank.
.
Step 2: Fill the e-liquid to the tank tube. Using an eliquid bottle or syringe, fill the tank tube by inserting e-liquid down the side wall (Do not fill e-liquid in the center hole, that is for air flow).

Step 3: Screw the bottom base back into the tank tube again.

* Tips: the protank coil head may be loosed with the bottom base, if so, please re-screw it in the bottom base again.
---8. Fill the e-liuid to the MEGA Clearomizer/Cartomizer (same as: Aerotank MEGA, Nautilus ect) .
1: Check to make sure each parts of Aerotank MEGA Tank be screwed tightly each other.

2: Screw the Airflow Adjustemnt Base off the tank.
(Tips: the Coil Head may be loosed with the Bottom Base, if so, please re-screw it again)

3: Fill E-liquid into the space between the Glass/Stainless Tube and the center metal tube.
(DO NOT over fill or get e-liquid into the center shaft.)

4: Screw the Airflow Adjustemnt Base onto the Aerotank MEGA Tank again.

9. Bottom fill the e-liuid to the Tank (same as: eTank, KORE tank ect) .
1: Screw the Airflow Adjustemnt Base off the eTank sub-ohm tank body.
(Tips: the Sub ohm Coil Head may be loosed with the Bottom Base, if so, please re-screw it again)
2: Fill E-liquid into the space between the Stainless Tube and the center metal tube.
(DO NOT over fill or get e-liquid into the center shaft.)
3: Screw the Airflow Adjustemnt Base onto the eTank Sub-Ohm tank body again.

10. Top fill the e-liuid to the Tank (same as: MELO III, Pisces A5 tank ect) .
1. First unscrew the top cap off the Pisces A5 tank atomizer.
2.Then slowly fill the e-liquid into the atomizer along the glass tube.
3.Finally screw the top cap tightly onto the Pisces A5 atomizer again.
Note:
1.Please don't add e-liquid into the air pipe and don't overfill.
2.Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before use.

|