eGo e-cig USB passthrough battery:Passthrough with 1100mAh MEGA Li-battery and 5 clicks On/OFF switch function.
--Can work with the eGo, eGo-T, eGo-C, eGo-W, eGo CE4, eGo CE5, eGo CE6, eGo protank, eGo H2, eGo type A, uGo ect eGo series e-cigarettes,
--Can work with computer or universal AC-USB adaptor directly,
--Can be charged on both end.
USB cable: 1000mm
Content of battery :1100 mAh
Nornal Working Voltage:3.6v-4.2v
Full battery can keep for :about 10-14 hours.
Charge time:3-4 hours
Can be charged on both end: On the end of the battery, there's the USB port which can connect to a USB connect line for charging. The button on the battery shows green when the voltage is above 3.9V; Blue means voltage is above 3.6V; Red means voltage is less than 3.6V; and when the Red LED light flashes rapidly for 10 seconds, it means voltage is less than 3.3V. Meanwhile, you can charge by using ghe ordinary USB charger as well. At the same time, you can enjoy your e-cig when it's being charged.
What atomizers/cartomizers can used in eGo USB passthrough battery?
The e-cig eGo USB passthrough battery can work in eGo-T atomizers, eGo CE4 cartomizers, eGo-C atomizer, eGo CE5 cartomizer , eGo CE6 cartomizer, eGo Mini Protank Glassomizer, eGo H2 Clearomizer, eGo-W cartomizers, 510 atomizers, eGo atomizers, 510 MEGA atomizer, eGo MEGA atomizers, 510 cartomizers, eGo cartomizers, eGo type A atomizers.
How to use eGo USB passthough battery:
--1. On/Off: click the power button five times to turn on the battery and five times again to turn off the battery
--2. Work: screw and connect the atomizer/Cartomizer of eGo series (eGo, eGo type A, eGo-T, eGo-C, eGo-W, Ce4, Ce5, ect) with the eGo USB passthrough battery, then they will be stand-by state, The eGo USB passthrough works only when you press the eGo LED power button. Press the LED power button and inhale at the same time.
--3. .Charge: The eGo pasthrough battery needs to be recharged when the button LED light flashes rapidly for 10 seconds and produces not more vapor.
Can be charged on both end. Use the cable connect the battery and the power outlet/USB port for your company, USB home charge, or USB car charger etc USB port.
The red LED light on the bottom stays on when charging. Normal charging time should be around 3 hours (even if the red LED light on the bottom of battery turns off and the botton stays green.