How to use pen style eGo-W F1 e-cigarette and how to re-fill e-liquid to the eGo-W cartomizer(CE3 giantomizer)
The eGo-W F1 Pen Style e-cigarette is new generation of Ego-T with new technology of 2ml transparent cartomizer(Clearomizer). There is no burning smell and no leakage. It contains much more e-Liquid and you get much more effective vape quantity with this new technology of cartomizer:
--Comes in a very stylish design with a pen holder which can easily be carried on ones shirt pocket and look like a normal pen
--2.0ml e-liquid refilled transparent atomizer/Clearomizer supports more vapes, one full filled cartridge can last about 500 puffs.
--Clear window see e-liquid inside, air valve to control smoke, visible e liquid atomizer indicate refilling
--Large capacity batteries, the average to heavy user can get 6 to 8 hours of use from a fully eGo charged battery (MEGA battery is 1100mAh, enables over 14 hours).
An eGo-W e-cigarette starter kit includes:
* 1 eGo-W pen cap
* 1 eGo-W plastic inhaler
* 1 eGo-W cartomizer shell
* 1 eGo-W clear cartomizer
* 2 eGo batteries
* 1 AC-USB adapter
* 1 eGo USB charger
* 1 10ml e-liquid
* 1 E-liquid injector
II. How to use
a. Screw the eGo-W battery:
Step 1: Screw out the eGo-W pen cap from the eGo-w cartomizer shell.
Step 2: Screw and connect the eGo-W battery with the eGo-W F1 clear cartomizer, then will be stand-by state.
Step 3: Take off the eGo-W cartomizer shell, you can find the eGo-W CE3 giantomizer clear cartomizer.
b. Fill the e-liuid to the eGo-W clear cartomizer:
Step 1: Take out the bottle lid;
Step 2: Cut off the top of bottle;
Step 3: Put the syringe needle into the bottle or draw the E-liquid inside the Injector.
Step 4: Fill the e-liquid to the eGo-W clear cartomizer.
c. Put the eGo-W cartomizer shell to the eGo-W clear cartomizer again.
* The eGo-W works only when you press the eGo LED button. Press the LED button and inhale at the same time.
d. Charge the eGo-W battery:
You just screw the eGo battery with the USB charger, then plug it into the PC or AC-USB Adapter. 1. the first charge should be kept for 8 hours, even if the LED light turns green. 2. Use for 20 minutes., 3. Charge the battery for another 1 hour. Your eGo battery is ready for normal using now. The normal charging time should be kept for 3 hours( even if the LED light turns green).
How to clean EGO-W cartomizer?
Many people ask about the cleaning of EGO-W cartomizer. The cartomizer will be dirty after a long time vaporing. It needs cleaning. BestEcig will show you how to clean your EGO-W atomizer.
Step 1: Prepare your EGO-W atomizer and a syringe which has been filled with alcohol (Alcohol instead of liquid).
Step 2: Fill the alcohol in the eGo-W cartormizer. Remember to fill it about 80% full.
Step 3: Keep the alcohol in the eGo-W cartomizer and put in aside for 24 hours.
Step 4: Draw back the alcohol to the syringe. Till the e-liquid now, the cleaning has been finished.