This is a 510 cartomizer disposable electronic cigarette, all of parts can be compared with the standard BE510/Joye510 e-cig.
1. How to use 510 Cartomizer disposable e-cig:
a. Remove the 510 cartomizer’s rubber cover
A 510 cartomizer is one piece cartridge and atomizer contained in a single unit.. It holds about 1ml e-liquid, this means less time refilling and more time enjoying!
b. Screwing the 510 mini e-cigarette battery
Screw and connect the 510 mini e-cigarette battery with the 510 disposable
cartomizer, then will be stand-by state.
c. Push the manual button, and enjoy it
Push the 510 battery manual button for no longer than 5 seconds to avoid overheating of
the 510 cartomizer, and at the same time, our battery will start protection circuit,
LED light flashes 4 tims and shut down the power, you need to wait 3 seconds
for working again.
d. Charge the 510 mini e cigarette battery
You need to charge the 510 battery when the battery LED flashes 8 times and the
circuit stops working no smoke production. To charge the battery, you just screw
the battery with the USB charger (or you can use 510 AC charger too), just a
second, the battery LED will flash 3 timeres, then the charger indicator light will
turn red from the green. The battery is fully charging when the indicator light turns
green from red again.
2. How to fill|re-fill the e-liquid to the 510 blank/empty/old cartomizer:
One new blank/empty 510 cartomizer holds about 1ml e-liquid, but we suggest you do not fill more 0.9ml e-cigarette liquid one time, and if your old 510 cartomier still can work, you can refill the e-liquid again too, for one old 510 cartomizer, please do not fill more 0.4ml one time.
a. Remove the 510 cartomizer’s rubber cover
A 510 cartomizer is one piece cartridge and atomizer contained in a single unit, for filling the e-cigarette e-liquid, you need to remove the 510 cartomizer’s rubber cover first.
b. Take out the 510 cartomizer’s cover
After remove the 510 cartomizer’s rubber cover, you can find there has a plastic white cartomizer cover (not gold parts) on the top of the cartomizer, take out it.
c. Take out the 510 cartomizer’s rubber washer
After take off the cartomizer’s cover, you still need to take out the rubber washer.
d. Fill the e-cigarette liquid to the 510 cartomizer
Now, you can draw the E-liquid inside the syringe, put the syringe into the side(notice: not the center) of the 510 cartomizer.
e. Re-put the parts into the 510 cartomizer
Reput the rubber washer to the filled 510 cartomizer, the plastic cartomizer cover, the new filled 510 cartromizer is finished now.
|
