| Thank you for using BestEcig Mini E-cigarette BE510!
I. Base packaging:
a. Mini E-cigarette BE510starter kit including:
b. Mini E-cigarette BE510 optional accessories:
II. How to use. a. Screwing the 510 mini e-cigarette battery:
Screw and connect the mini e cigarette battery with the mini e cigarette atomizer,then will be stand-by state.
b. Uncover the 510 mini e-cigarette cartridge:
Step 1: Cut the mini e-cartridge PE package;
Step 2: Remove the e-cartridge cover.
c. Put the BE510/joye510 mini e-cigarette cartridge into the mini e-cigarette atomizer.
Step1: take off the old inhaler and pull out.
Step2: Put the new e-cartridge into the mini e cigarette.
d.Push the manual button.
Push the manual button for no longer than 5 seconds to avoid overheating of the atomizer, and at the same time, our atomizer will start protection circuit, LED light flashes 4 tims and shut down the power, you need to wait 3 seconds for working again.
d. Charge the 510 mini e cigarette battery
You need change the battery when the battery LED flash 8 times and the circuit stops working no smoke production. To charge the mini e-cigarette battery, you just screw the mini e-cigarette battery with the special charger, just a second, the battery LED will be flashed 3 times, then the charger indicator light will turns red from the green. The mini e-cigarette battery is fully charger wehn the indicator light turns green from red again. The charging time for the regular use should be 2.5-3 hours. The charger works with the normal voltage at 100-240V, 50/60Hz.
|
